Fit-Out for Yachts and Launches

 

Home
Clinker Plywood Manual
Larger Plywood Craft
Fit-Out for Yachts and Launches
Sails for the Home Boat Builder
Stitch & Tape Boat Construction
Strip Plank Boat Construction
Plywood Canoe Construction
Model Boat Building in Wood
A Slight Mist on the Horizon
Desperate Doorways
Shameless Shoes

INDEX

Chapter 1
Interior Fit-Out
1.1    The Ergonomics of the Interior Space
1.2    Typical Fit-Out Joinery

  Chapter 2
Machinery Installation
2.1    Inboard Engine Installation
2.1.1   The Line of the Shaft
2.1.2   The Traditional Way of Forming the Shaft Line
2.1.3   The Modern Way of Forming the Shaft Line
2.2   Outboard Wells
2.3  Fuel Tanks for Inboard Engines

  Chapter 3
Keels
3.1  General 

3.2  The Deadwood/Wood Keel
3.3  Ballast Keel
3.4  Internal Ballast
3.5  Centreplates
3.6  Bilge Keels

  Chapter 4 
Rudders
4.1  General Discussion
4.2  Outboard (Transom) Hung Rudders
4.3  Inboard Hung Rudders
4.4  Rudder Fittings
4.4.1  For External (Outboard) Rudders
4.4.2  For Inboard Rudders

  Chapter 5
Water Ballast Tanks
5.1  General Discussion
5.2  Tank Construction & Fit-Out

Chapter 6
Water Systems
6.1  General Discussion
6.2  The Fresh water System
6.3  the WC/Sewage System
6.4  The Bilge Pumping System
6.5  Cockpit Drains

Chapter 7
The Gas System & Cabin Ventilation
7.1  General requirements
7.2  Gas Bottle (Cylinder) Stowage
7.3  Pipework and Connections
7.4  Cabin Ventilation

 Chapter 8
Simple Electrical Systems
8.1  General Notes
8.2  Electrical Circuits
8.2.1  Cable Sizes
8.2.2  Fuses
8.3  Overall Electrical System

  Chapter 9
Electrolysis
9.1  General Notes
9.2  Current Leakage
9.3  Sacrificial Anodes

  Chapter 10
Lightning Protection

  Chapter 11
Masts & Spars
11.1  General Notes
11.2  Materials for Wood Masts and Spars
11.3  Solid Masts and Spars
11.4  Hollow Masts and Spars
11.4.1  Round Section Hollow Masts and Spars
11.4.2  Rectangular Section Hollow masts and Spars

 Chapter 12 
Fitting the Deck gear for Rigging etc
12.1  General Notes
12.2  Chain Plates
12.3  Deck Cleats
12.4  Deck Winches
12.5  Positioning Jib Fairleads
12.5.1  How the Designer May
Position the Foresail Sheet Fairleads
12.5.2  Correcting a Badly Placed Foresail Fairlead
12.5.3  A Note on Correcting the Balance of a Sail Boat

  Chapter 13
Appendices & References
13.1  Glossary of Terms
13.2  Expanding a Curved Transom
13.3  Further Deck Gear
13.3.1  Boom Gallows
13.3.2  Mainsheet Horse
13.3.3  Raising the Coachhouse Top
13.4  Ground Tackle
13.5  Useful References for Further Reading

ISBN : 978-1-898909-15-6

Sample Pages

 

Back to SFDesign Catalogues & Manuals Page